Screw chiller pressure controller maintenance and maintenance methods
Screw chiller a lot of equipment can not run without pressure controller, due to the chiller in high efficiency operation, there will be a different pressure range between different accessories. In order to reduce the pressure on the performance of the screw chiller, the need for enterprises to regularly test the pressure controller, to ensure that the equipment is running with a safe pressure range, to help screw chillers effectively away from all kinds of failure.
The so-called pressure controller refers to the screw chiller in operation, the pressure control device in different locations. Due to the different pressure ranges for screw chillers have different impacts, daily operation of screw chillers, pressure controllers for high and low pressure for comprehensive difficulty detection and protection. Common screw chiller pressure controller is divided into high-pressure controller and low-pressure controller, due to the different principles of work, the scope of protection for the screw chiller is different. In the case of too high or too low pressure, the equipment will be protected by power failure to reduce the pressure change range is too large, resulting in screw chiller failure, effectively extend the service life of the screw chiller equipment.
As an electronic device, the pressure controller of the screw chiller has high requirements for the environment, which can provide a comfortable environment for the use of industrial chillers, and at the same time provide safe use of voltage and current, which can avoid a wide range of pressure changes. In the safe pressure range running screw chiller equipment, can reduce the probability of equipment failure, for enterprises to stay away from all kinds of screw chiller failure to provide comprehensive technical protection.
In the maintenance and maintenance of the chiller pressure controller, in order to ensure the safe and stable operation of the equipment, it is necessary to carry out meticulous testing. When the voltage and current reach a certain range, if the screw chiller pressure controller can be normal power off, it means that the screw chiller is running normally. If the operation can not be normal power off, it means that the screw chiller pressure controller system is faulty, at this time it is necessary to repair or directly replace the equipment in order to maintain the safe and stable operation of the screw chiller.
Screw chiller pressure controller has an important impact on maintaining the stability of equipment operation. In order to better complete all the operation process, the need for enterprises to master all kinds of maintenance screw chiller basic knowledge, and hire specialized personnel for the protection of ice and water machine, so as to improve the operating efficiency of the screw chiller, to avoid failures affecting the normal operation of the screw chiller.
The so-called pressure controller refers to the screw chiller in operation, the pressure control device in different locations. Due to the different pressure ranges for screw chillers have different impacts, daily operation of screw chillers, pressure controllers for high and low pressure for comprehensive difficulty detection and protection. Common screw chiller pressure controller is divided into high-pressure controller and low-pressure controller, due to the different principles of work, the scope of protection for the screw chiller is different. In the case of too high or too low pressure, the equipment will be protected by power failure to reduce the pressure change range is too large, resulting in screw chiller failure, effectively extend the service life of the screw chiller equipment.
As an electronic device, the pressure controller of the screw chiller has high requirements for the environment, which can provide a comfortable environment for the use of industrial chillers, and at the same time provide safe use of voltage and current, which can avoid a wide range of pressure changes. In the safe pressure range running screw chiller equipment, can reduce the probability of equipment failure, for enterprises to stay away from all kinds of screw chiller failure to provide comprehensive technical protection.
In the maintenance and maintenance of the chiller pressure controller, in order to ensure the safe and stable operation of the equipment, it is necessary to carry out meticulous testing. When the voltage and current reach a certain range, if the screw chiller pressure controller can be normal power off, it means that the screw chiller is running normally. If the operation can not be normal power off, it means that the screw chiller pressure controller system is faulty, at this time it is necessary to repair or directly replace the equipment in order to maintain the safe and stable operation of the screw chiller.
Screw chiller pressure controller has an important impact on maintaining the stability of equipment operation. In order to better complete all the operation process, the need for enterprises to master all kinds of maintenance screw chiller basic knowledge, and hire specialized personnel for the protection of ice and water machine, so as to improve the operating efficiency of the screw chiller, to avoid failures affecting the normal operation of the screw chiller.
